Here's the view of the house when standing in the Living Room.

Here's the bedroom loft framed in.  We added a cantilever for extra space in the bedroom.

Plugs and light switches are being installed.

The bathroom is coming together.  The wall mount toilet tank has been installed along with the washer/dryer hook-ups.

This is the back of the house.  The bathroom is the lower part and the bedroom loft will be above it.

Other side of the bathroom and bedroom loft.

We've got the plumbing finished for the kitchen sink, dishwasher and fridge.

Other window in the bedroom loft installed.

The hard wood floors have come in!

It may not look like much now, but above the toilet tank is the beginning of the platform for the bedroom loft.

This is the view while sitting in the bedroom loft, looking to the front of the house where the living room is located.

Front of the house with the bay windows.  This will be the Living Room.

The other side of the house has all the plywood completed.

The roof rafters are all in place.

One side of the house has the tin added.

The trailer is solid now.

More plugs and light switches (in the living room)

Tiny Houses

The first sheet of plywood has been installed.

This is the other side of the bedroom loft.

All the bay windows have been installed.

This is the back of the house where the bedroom loft is located.

Here's our french doors installed.

This is the view while standing in the living room, looking to the back of the house where the bedroom loft is located.

The rest of the house with spray foam.

This is the wall for the bathroom and the bedroom loft will be above it.

One window in the bedroom loft installed.

View from the living room of one side of the Tiny House getting the electricity wired.

One whole side of the house is completely covered in plywood.

Standing in the living room you can see most of the ship lap is completed and we've started installing the beed board and lights on the ceiling.

Our truck was fully loaded after picking up all the cabinets, sinks and the dishwasher.

These are the front doors.

Other side of the living room.

One box has the toilet and the other has the hotwater heater.

The "walls" came in today.  This is all the shiplap that we will use for the walls in the Tiny House.

This is the kitchen window.

The whole house is wrapped in Tyvek and the first window has been installed.

This side is where the kitchen will be located with a long window to look through while prepping meals.

The Gooseneck Trailer

The plumbing is complete for the shower and the bathroom sink.

First strip of Tyvek has been installed.

This is the first window to be completely trimmed out.

The first piece of house wrap is on.

View from the living room of the other side of the Tiny House getting the electricity wired.

​​This is our current project!

The Tula Gooseneck Tiny House 



The whole floor of the trailer has spray foam, bat insulation and plywood flooring.

Sitting in the bedroom you can see that the ship lap flooring has been installed and the beginning stages of our accent wall under the living room.  The black section will have old "barn wood" panels on it.

Framing in the living room.

First piece of tin on the roof.

This side has the french doors and a long window to look through while eating.

The outside of the house is beginning to take shape.

Took advantage of this nice weather to start putting the tin roof on.

The ship lap walls are starting to get installed.

Another angle of the front doors.

Here's the heating and A/C unit.

The bathroom with spray foam.

All the appliances have been delivered. Refrigerator, Oven range unit, washer/dryer combo unit, and microwave/vent hood.

A little sneak peak of how the outside of the house will look.

Here's the living room with spray foam.

This is the window opposite from the kitchen.

Our metal for the side of the house and the roof arrived.

The roof has plywood from front to back.

The bathroom has been plumbed.

All the windows in the living room are finished.